23
Dec

no comment

   Posted by: cristina_crow   in technical

Linux (a149::2 – mtu 2500) — (a149::1 – mtu 9216, vlan access 5 – mtu 2500) Cisco 6500 (2001::2 – mtu 9216, vlan access 3 – mtu2500)—(2001::1 – mtu 2500)Netscreen5200

ns5200-> ping
IP version [4/6]:6
Target IPv6 address:a149::2
Using Echo request [Y/n]Y
Repeat count [5]:
Datagram size [100]:
Timeout in seconds[1]:
Source interface:eth2/2
Type escape sequence to abort
Sending 5, 100-byte ICMP Echos to a149::2, timeout is 1 seconds
!!!!!
Success Rate is 100 percent (5/5), round-trip time min/avg/max=3/3/4 ms
ns5200->           ping
IP version [4/6]:6
Target IPv6 address:a149::2
Using Echo request [Y/n]Y
Repeat count [5]:
Datagram size [100]:1500
Timeout in seconds[1]:
Source interface:eth2/2
Type escape sequence to abort
Sending 5, 1500-byte ICMP Echos to a149::2, timeout is 1 seconds
…..
Success Rate is 0 percent (0/5)

Tags: , ,

This entry was posted on Wednesday, December 23rd, 2009 at 5:24 pm and is filed under technical. You can follow any responses to this entry through the RSS 2.0 feed. You can leave a response, or trackback from your own site.

2 comments so far

vmp
 1 

-EMSGSIZE?

December 23rd, 2009 at 11:11 pm
 2 

aha…

December 23rd, 2009 at 11:34 pm

Leave a reply

Name
Mail (will not be published)
URI
Comment