pentru ca am intrat in criza de timp si, ori nu sunt eu prietena cu Google, ori nu am cautat suficient si cu destula atentie, dar nu pot rezolva problema de mai jos, therefore I would appreciate any help
…luat cu copy-paste din mailurile trimise pe rlug-offtopic
*** singura “descoperire” so far este modul de lucru al switchului in 2 feluri: campus-mode si isp-mode; campus-mode, dupa autentificare (pe un vlan – temporar) arunca userul intr-un alt vlan – permanent — eu nu am gasit cum anume se face asta si cum se trece/daca se poate trece _cumva_ intre campus-mode si isp-mode
————–
Salut
De cateva zile ma chinui sa fac un scenariu de 802.1x – MultiAuth unicast. Clientul
e o aplicatie proprietara care genereaza trafic EAPoL – 802.1x, authenticatorul este Summit48si ExtremeWare Version 7.3.0.49 [non-ssh], iar serverul de autentificare este un ACS 4.1.
1.
Aplicatia-client este cea pe care o testez ca face ok generarea de trafic EAP; ce vine peste EAP e irelevant – problema se pune atunci in ACS;
2. Switchul – Summit a fost ales pentru ca stie sa faca 802.1x (netlogin) si pe porturi taggate (trunk) – ideea este ca traficul pe care eu il trimit sa fie incapsulat EAP, dar si cu tag de vlan – asta e testul;
3. ACS-ul are un set de useri si politici de acces (care sunt configurate si pe client).
Problema: autentificarea da cu Fail, Summit-ul imi inchide porturile si raporteaza Auth failed, desi ACS-ul inregistreaza in loguri ca userii au fost autentificati.
Nu’s Summit guru, si nici nu am cautat pana mi-au iesit peri albi pe Google; oricum, informatiile referitoare la switch-ul asta sunt destul de sumare, chiar si in UserGuide-ul lor
Multumesc,
Cristina
—————————————————————————
Config Summit:
configure sys-health-check alarm-level Log
create vlan “vlan10″
create vlan “vlan20″
create vlan “st10″
create vlan “st6″
create vlan “st7″
create vlan “st8″
create vlan “st9″
#
# Route Map Configuration.
#
#
# Config information for VLAN Default.
configure vlan “Default” tag 1 # VLAN-ID=0×1 Global Tag 1
configure stpd s0 add vlan “Default”
configure vlan “Default” ipaddress 60.60.60.3 255.255.255.0
configure vlan “Default” add port 1 untagged
configure vlan “Default” add port 2 untagged
configure vlan “Default” add port 3 untagged
configure vlan “Default” add port 4 untagged
configure vlan “Default” add port 5 untagged
configure vlan “Default” add port 49 untagged
configure vlan “Default” add port 50 untagged
#
# Config information for VLAN vlan10.
configure vlan “vlan10″ tag 10 # VLAN-ID=0xa Global Tag 4
configure vlan “vlan10″ add port 17 untagged
configure vlan “vlan10″ add port 21 tagged
configure vlan “vlan10″ add port 22 tagged
configure vlan “vlan10″ add port 23 tagged
configure vlan “vlan10″ add port 24 tagged
configure vlan “vlan10″ add port 25 tagged
configure vlan “vlan10″ add port 26 tagged
configure vlan “vlan10″ add port 27 tagged
configure vlan “vlan10″ add port 28 tagged
configure vlan “vlan10″ add port 29 tagged
#
# Config information for VLAN vlan20.
configure vlan “vlan20″ tag 20 # VLAN-ID=0×14 Global Tag 5
configure vlan “vlan20″ add port 18 untagged
configure vlan “vlan20″ add port 30 tagged
configure vlan “vlan20″ add port 31 tagged
configure vlan “vlan20″ add port 32 tagged
configure vlan “vlan20″ add port 33 tagged
configure vlan “vlan20″ add port 34 tagged
configure vlan “vlan20″ add port 35 tagged
configure vlan “vlan20″ add port 36 tagged
configure vlan “vlan20″ add port 37 tagged
configure vlan “vlan20″ add port 38 tagged
#
# Config information for VLAN st10.
configure vlan “st10″ tag 510 # VLAN-ID=0×1fe Global Tag 6
configure vlan “st10″ add port 16 untagged
configure vlan “st10″ add port 5 tagged
configure vlan “st10″ add port 6 tagged
configure vlan “st10″ add port 7 tagged
configure vlan “st10″ add port 8 tagged
configure vlan “st10″ add port 9 tagged
configure vlan “st10″ add port 10 tagged
configure vlan “st10″ add port 11 tagged
#
# Config information for VLAN st6.
configure vlan “st6″ tag 506 # VLAN-ID=0×1fa Global Tag 34
configure vlan “st6″ add port 12 untagged
configure vlan “st6″ add port 5 tagged
configure vlan “st6″ add port 6 tagged
configure vlan “st6″ add port 7 tagged
configure vlan “st6″ add port 8 tagged
configure vlan “st6″ add port 9 tagged
configure vlan “st6″ add port 10 tagged
configure vlan “st6″ add port 11 tagged
#
# Config information for VLAN st7.
configure vlan “st7″ tag 507 # VLAN-ID=0×1fb Global Tag 35
configure vlan “st7″ add port 13 untagged
configure vlan “st7″ add port 5 tagged
configure vlan “st7″ add port 6 tagged
configure vlan “st7″ add port 7 tagged
configure vlan “st7″ add port 8 tagged
configure vlan “st7″ add port 9 tagged
configure vlan “st7″ add port 10 tagged
configure vlan “st7″ add port 11 tagged
#
# Config information for VLAN st8.
configure vlan “st8″ tag 508 # VLAN-ID=0×1fc Global Tag 36
configure vlan “st8″ add port 14 untagged
configure vlan “st8″ add port 5 tagged
configure vlan “st8″ add port 6 tagged
configure vlan “st8″ add port 7 tagged
configure vlan “st8″ add port 8 tagged
configure vlan “st8″ add port 9 tagged
configure vlan “st8″ add port 10 tagged
configure vlan “st8″ add port 11 tagged
#
# Config information for VLAN st9.
configure vlan “st9″ tag 509 # VLAN-ID=0×1fd Global Tag 37
configure vlan “st9″ add port 15 untagged
configure vlan “st9″ add port 5 tagged
configure vlan “st9″ add port 6 tagged
configure vlan “st9″ add port 7 tagged
configure vlan “st9″ add port 8 tagged
configure vlan “st9″ add port 9 tagged
configure vlan “st9″ add port 10 tagged
configure vlan “st9″ add port 11 tagged
disable telnet
enable web http
disable web https
# SNMP Configuration
enable cli-prompt-number
# Load Sharing Configuration
configure lacp keep-alive 10
# Protocol definitions
# Spanning tree information
# GVRP configuration
# MAC FDB configuration and static entries
configure ipfdb agingtime 0
# — IP Interface[0] = “Default”
# Global IP settings.
#
# IP ARP Configuration
configure iparp max-entries 8192
#
# IP Route Configuration
configure iproute add default 60.60.60.1 1
# Multicast configuration
disable igmp snooping
enable igmp snooping vlan “Default”
enable igmp snooping vlan “MacVlanDiscover”
enable igmp snooping vlan “vlan10″
enable igmp snooping vlan “vlan20″
enable igmp snooping vlan “st10″
enable igmp snooping vlan “st6″
enable igmp snooping vlan “st7″
enable igmp snooping vlan “st8″
enable igmp snooping vlan “st9″
# RIP interface configuration
# RIP global parameter configuration
enable radius
configure radius primary shared-secret encrypted “TMH”
configure radius timeout 30
configure radius primary server 60.60.60.1 1645 client-ip 60.60.60.3
configure radius primary server 60.60.60.1 timeout 30
# Network Login Configuration
enable netlogin port 5 vlan st6
enable netlogin port 6 vlan st6
enable netlogin port 7 vlan st6
enable netlogin port 8 vlan st6
enable netlogin port 9 vlan st6
enable netlogin port 10 vlan st6
enable netlogin port 11 vlan st6
enable netlogin port 5 vlan st9
enable netlogin port 6 vlan st9
enable netlogin port 7 vlan st9
enable netlogin port 8 vlan st9
enable netlogin port 9 vlan st9
enable netlogin port 10 vlan st9
enable netlogin port 11 vlan st9
enable netlogin port 5 vlan st10
enable netlogin port 6 vlan st10
enable netlogin port 7 vlan st10
enable netlogin port 8 vlan st10
enable netlogin port 9 vlan st10
enable netlogin port 10 vlan st10
enable netlogin port 11 vlan st10
enable netlogin Session-Refresh 1
——————————————————————-
Erori pe care le vad pe Summit cand rulez testul:
03/25/2009 00:39:10.56 <Info:SYST> Authentication failed for DOT1X user fast-nac Mac 00:3d:ca:78:01:01 Port 9
03/25/2009
00:39:11.03 <Info:USER> Network Login 802.1x User fast-nac logged
in (0.0.0.0) Mac 00:3d:ca:78:01:05 Port 9 Vlan st9
03/25/2009 00:39:11.03 <Info:USER> Network Login 802.1x User fast-nac Logged into VLAN st9
03/25/2009
00:39:11.03 <Info:SYST> Network Login failed for CAMPUS-MODE user
fast-nac mac 00:3d:ca:78:01:05 (Dest. vlan st9) : port 9 is a tagged
port for Vlan st9
03/25/2009 00:39:11.03 <Info:SYST> Authentication failed for DOT1X user fast-nac Mac 00:3d:ca:78:01:05 Port 9
03/25/2009
00:39:11.06 <Info:USER> Network Login 802.1x User fast-nac logged
in (0.0.0.0) Mac 00:3d:ca:78:01:04 Port 9 Vlan st9
03/25/2009 00:39:11.06 <Info:USER> Network Login 802.1x User fast-nac Logged into VLAN st9
03/25/2009
00:39:11.06 <Info:SYST> Network Login failed for CAMPUS-MODE user
fast-nac mac 00:3d:ca:78:01:04 (Dest. vlan st9) : port 9 is a tagged
port for Vlan st9
03/25/2009 00:39:11.06 <Info:SYST> Authentication failed for DOT1X user fast-nac Mac 00:3d:ca:78:01:04 Port 9
03/25/2009
00:39:11.18 <Info:USER> Network Login 802.1x User fast-nac logged
in (0.0.0.0) Mac 00:3d:ca:78:01:03 Port 9 Vlan st9
03/25/2009 00:39:11.18 <Info:USER> Network Login 802.1x User fast-nac Logged into VLAN st9
03/25/2009
00:39:11.19 <Info:SYST> Network Login failed for CAMPUS-MODE user
fast-nac mac 00:3d:ca:78:01:03 (Dest. vlan st9) : port 9 is a tagged
port for Vlan st9
03/25/2009 00:39:11.19 <Info:SYST> Authentication failed for DOT1X user fast-nac Mac 00:3d:ca:78:01:03 Port 9
————————————————————–
ACS imi da pe toti userii folositi in acest test authentication successful.
—————————————————————-

Tags: passion, techie